First flight with Naze32 controller and turnigy talon frame

Here are the Videos of the first flight http://youtu.be/Jvl7E0XRZEA http://youtu.be/KGCjY_IY9u8

Posted in build log | Comments Off on First flight with Naze32 controller and turnigy talon frame

Naze32 FunFly Controller for the next Quadcopter Version

dsc-3934

Naze32 FunFly is a flight controller I am going be using for my next quadcopter version. The last setup I had was with an Arduino, Aeroquad Software and the Turnigy Frame. However this setup had a few flaws, especially with the Aeroquad flight software. A colleague sold me his Naze32 flight controller to upgrade my ...

Posted in build log, quadcopter, Quadcopter V2, shield, software | Comments Off on Naze32 FunFly Controller for the next Quadcopter Version

3D Printer Workshop @snowflake : “3D-Drucker im Eigenbau”

Take part in the snowflake 3D Printer workshop (site is in German):¬†http://www.snowflake.ch/training/seminare-und-workshops/3d-drucker-workshop/  

Posted in 3d printer | Comments Off on 3D Printer Workshop @snowflake : “3D-Drucker im Eigenbau”

3D Printed Parts

Foto

I had a good time playing around with my 3D printer. So I thought it is the time to showcase a few of my prints. I got relatively good results from the beginning but wasn't entirely happy with the print quality as some layers weren't printed properly or the infill was off sometimes. I fixed most ...

Posted in 3d printer, prints | Tagged , , , | Comments Off on 3D Printed Parts

Unboxing and first print video

The unboxing and first print video is ready so I thought I share it with you guys. I recorded it with my iPhone so please excuse the bad quality. The unboxing shows all the parts delivered with the package when you buy the printer. I was lucky and had only four screws missing. http://youtu.be/k0ODLEwB6qE I decided to print ...

Posted in 3d printer, build log, prints | Comments Off on Unboxing and first print video

Build and first 3d print

plastics and plattform

Assembling the Velleman 3D Printer K8200 was straight forward. Online they have a great manual with build instructions that is very detailed and has photos for every single step. You need to have some skills and understanding of putting things together and good soldering skills are also a big plus. But other than that I'd say ...

Posted in 3d printer, build log | Tagged , , , | Comments Off on Build and first 3d print